Pumps Solution for your Needs

Since 1952 Finder Pompe has been recognized is one of the European leading Companies in the design and manufacture of engineered pumps and systems for Oil & Gas and industrial applications which require heavy duty products and advanced technical solutions.

We offer a quick solution of your needs based on OH1 type of pumps, especially HC and VX model of pumps which are applicable for petrochemical, power generation, desalination, chemical, pharmaceutical and food industries.
Finder-pompe model HC

Model HC

Radially split centrifugal pumps with close impeller complying with ISO 2858/DIN 24256/ISO 5199 Norms. A sturdy and deep stuffing box allows to fit single or double, either conventional or cartridge design mechanical seals. Upon request, they can be equipped with heating/cooling chambers on the pump casing and/or stuffing box. HC Pumps can be manufactured in any material combination depending on actual conditions of service. HC pumps cover a very wide range of applications and are suitable for all the chemical and food industries. They can pump various kind of liquids: clean, with small suspended solids, cold or hot, acid, corrosive, slightly viscous fluids. CHEM pumps cover a wide range of applications and can be successfully used in chemical, pharmaceutical, cosmetic, food and beverage, textile industries to convey corrosive, agressive fluids, solvents and oils. They are also suitable for general industrial service.

CHEM pumps cover a wide range of applications and can be successfully used in chemical, pharmaceutical, cosmetic, food and beverage, textile industries to convey corrosive, agressive fluids, solvents and oils. They are also suitable for general industrial service.

Finder Pompe model VX

Model VX

Radially split single stage pumps with vortex impeller which allows for certain sizes to handle liquids with suspended solids having a size up to 80% of the nozzle diameters. The packing gland allows the installation of mechanical seals and packing rings of any kind. Upon request, they can be fitted with chambers to cool or heat the casing and/or the stuffing box. They are normally manufactured by using a wide variety of metallurgies, such as cast iron, nodular cast iron, carbon steel, stainless steel and special alloys. Specifically designed to handle liquids with suspended solids and sludge (raw and decomposed up to 6%), especially in treatment plants systems, paper mills (dry residual up to 8%) and for application in the sugar, chemical and steel industries.